{ "id": "black-cambric-dust-cover-fabric", "sku": "black-cambric-dust-cover-fabric", "title": "Black Cambric Dust Cover Fabric", "slug": "black-cambric-dust-cover-fabric", "price": 64.99, "currency": "NZD", "availability": "in_stock", "category": "upholstery-fabrics", "category_label": "Upholstery Fabrics", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "231 g", "images": [ "https://fabriccompany.co.nz/dropship-images/upholstery-fabrics/black-cambric-dust-cover-fabric/main-black-cambric-dust-cover-fabric.jpg", "https://fabriccompany.co.nz/dropship-images/upholstery-fabrics/black-cambric-dust-cover-fabric/black-cambric-dust-cover-fabric-4.jpg", "https://fabriccompany.co.nz/dropship-images/upholstery-fabrics/black-cambric-dust-cover-fabric/black-cambric-dust-cover-fabric-5.jpg", "https://fabriccompany.co.nz/dropship-images/upholstery-fabrics/black-cambric-dust-cover-fabric/black-cambric-dust-cover-fabric-6.jpg" ], "description_short": "This black polypropylene fabric covers exposed furniture components and offers stretch for fitting around corners.", "description": "When the underside is the only part that needs attention\n\nA sofa can still be comfortable even when the cloth underneath has torn or started hanging loose. You might notice it while cleaning, moving furniture or reaching for something that rolled underneath. The visible upholstery may be fine, but the exposed base looks unfinished.\n\nCambric dust cover fabric is made for this hidden area. It covers internal parts and helps keep dust and dirt away from them. Replacing worn cloth is a focused repair, rather than a reason to change all the upholstery.\n\nBefore starting, check what has actually failed. Loose bottom cloth is one job. A cracked frame, broken spring or sagging seat support is another. New cloth can tidy the underside, but it cannot fix the structure above it.\n\nWhat this piece provides\n\nThis product is one piece of black cambric fabric, 152 cm (60 in) wide and 3 yards (2.74 m) long. It is supplied in that size, not cut to your furniture measurements.\n\nThe product details describe non-woven polypropylene with stretch. The listed item weight is 231 g, and the fabric weight is 1.2 oz per square yard. Those figures describe different things. One is the weight of the item; the other describes the fabric per unit of area.\n\nIts job is to create a tidy underside covering. The black cloth conceals springs, screws, staples and other internal components. Think of it as a finishing layer, not a load-bearing part of the furniture.\n\nHow a dust cover works\n\nUpholstery underlining fabric spans an opening beneath a piece of furniture and attaches around suitable edges. It places a layer between the internal parts and the space below.\n\nThis helps reduce direct exposure to dust and dirt, but it does not turn the base into a sealed enclosure. The maker does not give a filtration rating or claim a dustproof seal. Gaps around legs and fittings may still be needed.\n\nThe cloth can be cut, folded and stapled. Its stretch helps with shaping around corners, though no stretch percentage is stated. Use that flexibility to improve the fit, not to make an undersized piece reach farther than planned.\n\nWhich projects suit this fabric?\n\nSofa dust cover replacement is a common use. If the couch bottom fabric has split but the rest of the furniture is sound, replacing just that layer can make sense.\n\nChairs and ottomans are also listed applications. Their smaller openings may leave material for another repair, but this depends on your cutting layout. Do not assume that one piece will cover a set of chairs without measuring every opening.\n\nA box spring dust cover is another possible project. Recliners are also listed, though their moving parts need special care during fitting. In every case, the opening size, fixing edges and access matter more than the furniture's name.\n\nMeasure the opening, then the fixing area\n\nStart by measuring the full underside area you want to cover. Details its length and width, then look at where the new cloth will attach. You need enough fabric to reach those fixing points and allow for folded edges.\n\nDo not measure only the damaged patch if you intend to replace the whole cover. A small tear may sit in a much larger panel. Equally, do not rely on a sofa's advertised width, since that may include arms and other parts outside the underside opening.\n\nCompare your measurements with the supplied piece in both directions. Turning a cutting layout around may help, but the stretch should not be treated as extra guaranteed coverage. Leave a practical allowance rather than planning an exact edge-to-edge fit.\n\nPlan before making the first cut\n\nLay out your measurements on paper before cutting the actual fabric. This is especially useful when one piece will become several chair covers or a mix of smaller panels.\n\nInclude the folded edges in each shape. Mark any openings needed for legs, brackets or other fittings. A simple drawing can reveal that two panels fit side by side, or that one large panel uses nearly the whole piece.\n\nKeep the fabric uncut while checking suitability. Once you cut it, you lose the option of a return under the stated change-of-mind conditions. Taking a few extra minutes at this stage is easier than trying to recover a piece cut too small.\n\nPrepare the furniture safely\n\nClear enough room to work without balancing furniture against a wall or another unstable surface. Large sofas and bed bases may require another person to help turn and support them. Do not work beneath furniture that could fall or shift.\n\nBefore removing the old cover, look at how it was fitted. A photo can help you remember the edge folds, attachment points and any openings around fittings. Treat the old cloth as a reference, not proof that the same placement was correct.\n\nRemove loose old fasteners carefully and inspect the frame beneath. If you find damage, stop and assess it before fitting the new cover. Hiding a fault under fresh cloth does not resolve it.\n\nFit for an even finish\n\nPosition the replacement cloth so the allowance is spread around the edges. Check that the whole opening is covered before fastening any section permanently.\n\nFor a suitable frame, the product information describes stapling as a fitting method. Choose fasteners and tools to suit the furniture, and check what lies behind each fixing point. Avoid placing fasteners near mechanisms or other parts that could be damaged.\n\nWork gradually around the opening, keeping the cloth even. Fold edges where appropriate and avoid pulling hard to remove every small ripple. A neat surface is the aim, but excessive tension puts strain on the fabric and its fixing points.\n\nPause during fitting to check that the piece has not shifted. Small corrections are simpler before the entire edge is secured.\n\nPay attention to moving parts\n\nA recliner dust cover needs more planning than a simple fixed chair base. Fabric must stay clear of the moving mechanism, including parts that change position as the chair opens or closes.\n\nDo not bridge a moving gap simply because it looks untidy when the chair is still. The cloth could catch or pull loose when the furniture moves. If you cannot tell which areas need clearance, seek advice from an upholsterer.\n\nThe same care applies to ottoman hinges and other moving fittings. A finished underside should not interfere with how the furniture works. Appearance comes after a clear, unobstructed mechanism.\n\nKnow when to choose a different fabric\n\nBlack upholstery fabric can describe many different products, so check the intended role rather than shopping by colour alone. This cloth is for furniture undersides. It is not described as a cover for seats, cushions or decorative panels.\n\nThe maker does not specify waterproof performance, outdoor suitability or a fire rating. If your repair has a particular performance requirement, do not assume this fabric meets it.\n\nLikewise, cambric fabric for upholstery is not a substitute for structural webbing or spring repairs. If the seat itself is dropping, investigate the support system. A new underside cover may be the last step after repairs, but it should not be the only step.\n\nCare after fitting\n\nOnce the cloth is in place, check for loose edges and spots where it might rub against a fitting. Look again after moving the furniture, since handling can expose a snag or loosen an edge.\n\nRemove loose surface dust gently. Avoid dragging sharp cleaning attachments across the cloth or pulling it away from its fixings. If there is a tear, assess whether a fresh panel would be more sensible than repeatedly tightening the damaged area.\n\nNo washing instructions are supplied. Seek advice before washing the fabric or applying cleaning products, rather than assuming that care advice for other polypropylene items will apply here.\n\nCheck delivery and returns before starting\n\nIf you need the repair finished by a certain date, confirm the delivery estimate before ordering. A lead time is not specified by the maker, so leave room in your plans rather than taking the furniture apart in advance.\n\nWhen the piece arrives, check it against your project before washing, cutting or using it. Keep the original packaging while you decide.\n\nReturns are available within 14 days of delivery for unwashed, uncut, unused fabric in its original packaging. The customer pays return postage for these returns. Faulty or wrongly described goods are put right free of charge.\n\nThe short version\n\nThis black cambric cloth is a finishing material for furniture undersides. It suits measured repairs where one piece, 152 cm (60 in) wide and 3 yards (2.74 m) long, provides enough coverage and edge allowance.\n\nMeasure carefully, check the frame and plan your cuts. Fit the fabric evenly without over-stretching it, and keep every moving part clear. For sound furniture with worn bottom cloth, it offers a straightforward way to restore a tidy hidden surface.", "llm_summary": "This black cambric dust cover fabric is supplied as one piece measuring 152 cm (60 in) wide and 3 yards (2.74 m) long. The maker gives dimensions of 274.32 x 152.4 x 0.1 cm and an item weight of 231 g. It is non-woven polypropylene with stretch and a listed fabric weight of 1.2 oz per square yard. Intended uses include underside covers for sofas, chairs, ottomans, recliners and box springs, subject to fit. It conceals internal components and helps keep dust away. Delivery lead time and warranty are not specified by the maker. Returns are available within 14 days of delivery for unwashed, uncut, unused fabric in its original packaging, with customer-paid return postage.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; Consumer Guarantees Act 1993 guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Fabric Shop Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://fabriccompany.co.nz/black-cambric-dust-cover-fabric/", "canonical_url": "https://fabriccompany.co.nz/black-cambric-dust-cover-fabric/", "json_url": "https://fabriccompany.co.nz/api/products/black-cambric-dust-cover-fabric.json", "updated_at": "2026-11-13" }